|
Re: Errors on WEL [ Read Responses | Return to the Index ]
Posted by Phil on Monday, 25 August 2008, at 11:32 p.m., Actually... the device causing the error will be easy to spot. On the live data page, there is a col labeled "F" for found, and one labeled "V" for valid. Every device that was "found" during the last bus scan will have a "Y" in the "F" (found) col. These should also have the number "5" in the "V" col. If a device starts to give bad data, the number in the V col will drop down to "0", at which point it will be added to the "errors" list. So if you have 1 error, look for the device with F=Y and V=0 Phil.
This site is all about building a cool, energy efficient house, that makes maximum use of earth sheltered design, passive solar heating and cooling, geothermal exchange energy management, and right sizing of the house for it's designated use. The home's placement is on a south-facing hillside in Deep Creek Lake, Maryland. This site describes the design process, the technologies used and the expected results. We also have a comprehensive Links Page for anyone who is also interested in designing a similar project. |